China Standard Tsh-65p Twin Screw Plastic Extruder for Biodegradable Materials Pellets threaded shaft bushing

Product Description

TSH-65P twin screw plastic extruder for biodegradable materials pellet

Product model for your choosing:
(Notes: Different raw materials, the output is different, please tell me what’s the material you want to produce, I will recommend you the correct model.)

Type TSH-20 TSH-35 TSH40 TSH52 TSH65 TSH75 TSH95
Screw Diameter (mm) 22 35.6 41 51.4 62.4 71 93
Screw Speed (rpm) 600 600 600 600 600 600 600
Motor Power (kW) 4 18.5 30 55 90 132 315
L/D 32-60 32-68 32-68 32-68 32-68 32-68 32-68
Output (Kg/h) 2-15 15-95 70-120 155-255 255-400 450-750 950-1600

Product details:

1. Twin screw main extruder: Main motor: Imported “WEG”or “SIEMENS” Variable frequency motor(The frequency converter will automatically change the frequency to reduce the frequency of the motor. The operating current will always run between 80%, 50%, and 30% of the rated power. This will greatly reduce the motor’s operating current and achieve the effect of saving electricity).
 

2. Gearbox: Warranty: 3 years; (2)Concentricity deviation of output shaft and input shaft: within 0.2mm; (3)Both output shaft radial bearings are imported “IKO”and “NSK” bearings;

3. Electric cabinet box: (1)Inverter: Imported Switzerland”ABB”, Japan”TOSHIBA”,”FUJI”; (2)PLC: Imported “SIEMENS” brand; (3)Main electrical controller:”Schneider” brand; (4)Display of electric current:Japan “OMRON” brand; (5)Temperature instruments: Japan “OMRON” brand;
 

4. Twin-screw Barrel

Bimetal wear-resistant and corrosion-resistant material, the base material is 45# steel, after multiple forging, quenching and tempering treatment; the cylinder is inlaid with α-101 wear-resistant and corrosion-resistant alloy bushing, which has better wear resistance and corrosion resistance than general alloy bushings.

5. Screw elements

(1)Material is W6Mo5Cr4V2 (high speed tool steel) with the best wear resistance, the whole adopts vacuum quenching treatment, hardness is 60 ~ 62HRC; (2)Designed by the building block principle, and the screw element and the screw shaft are connected by an involute spline, and the screw combination can be adjusted according to the process requirements; The screw elements are all made by CNC machining center, with good identity and strong process repeat-ability,which is benefit for changing;

6. Screen changer+Die-head: Quick open die-head, convenient and fast, short flow path of the machine head and less material storage can significantly reduce the deterioration of the material’s physical properties, yellowing, black spots and other defects;
 

 

Machine applications:
(Notes: Our machine can be applied in the production of different plastics, such as color masterbatch, filler masterbatch, engineering plastics, reinforced materials, recycling plastics, biodegradable materials and so on.)

 

Our certificates:
Tengda has obtained High-tech Enterprise and National High-tech Enterprise award.
We have passed ISO,TUV,CE Certifications, more than 30 patents.

Our customers:

                                                           Related products:
                      product-list-1.html

After-sales Service: Provide
Warranty: Gearbox: 3 Years; Extruder: 1 Year
Type: Plastic Granules Extruder Machine
Plastic Processed: Any Plastic Granules
Product Type: Granulating Extruder
Feeding Mode: Multiple Feed
Customization:
Available

|

Customized Request

screwshaft

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are two main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on one side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between two and sixteen inches. A screw with a pointy tip has a smaller major diameter than one without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is one element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of one thread to the corresponding point on the next thread. Measurement is made from one thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in one revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
screwshaft

The lead of a screw shaft

Pitch and lead are two measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are two ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with two or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are two types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
screwshaft

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

China Standard Tsh-65p Twin Screw Plastic Extruder for Biodegradable Materials Pellets   threaded shaft bushingChina Standard Tsh-65p Twin Screw Plastic Extruder for Biodegradable Materials Pellets   threaded shaft bushing
editor by CX 2023-04-23